Lenze EZN3A0120H012 Montageanleitung Seite 43

Design 2
EZN3A0055H045
ƒ
EZN3A0055H045U
ƒ
How to mount the filter:
1. Read the chapter "Mechanical installation" in the documentation of the
basic device. Read up particularly on ...
–
Precautionary measures while mounting
–
Installation material required
–
Compulsory starting torques
–
Bore spacings and free spaces
2. If the filter is connected to the controller in push−through technique or
cold−plate technique, remove the bottom part 0 by releasing 6 screws.
3. Mount four fixing brackets 1 to the mains filter.
4. Mount the mains filter in the control cabinet.
EDKZN3B045 DE/EN/FR 3.0
Mechanical installation
l
Mounting steps
EZN−034b
3
43