Things To Do To Have The Filter Usage Time Calculated Automatically - Beko GNE 134620 X Bedienungsanleitung

Things to do to have the filter usage time calculated
automatically
(For products connected to the mains water line and equipped with filter)
the key lock.
2- Then press Eco-Extra (1), Fridge Compartment Temperature Setting (4), Quick
Cool (5) and Freezer Compartment Temperature Setting (3) buttons respectively.
1
3
If button configuration is pressed in the correct order, key lock symbol will go off,
buzzer will be activated shortly, and Filter change warning indicator illuminates.
Press cancel filter change warning button (Item 19 in display descriptions) after
changing the filter to have the filter usage time calculated automatically.
NOTE:
If the filter usage time is being calculated automatically, filter change warning
1.
indicator will illuminate continuously in a few seconds after the product is
plugged in.
Automatic filter usage time calculation is not active ex factory. It must be
.
2
activated in products equipped with a filter.
3.
calculation is activated in order to deactivate the filter usage time calculation.
27
EN
A
B
4
5