Product Functions; Applicable Water; Main Technical Parameters; Overview - Philips Water Solution AWP2900 Bedienungsanleitung

Product Functions

Philips pitchers AWP2900, AWP2915, AWP2918, AWP2920, AWP2921,
AWP2922, AWP2950 and AWP2970 apply multi-stage ltration technology,
which can reduce chlorine (odor and taste), VOCs and pesticides which may
exist in the tap water. The ion exchange resin can soften the water and reduce
soluble lead, and the hollow ber membrane can remove bacteria like E.coli in
the water.

Applicable Water

Municipal tap water

Main Technical Parameters

Model AWP2950
AWP2970
Main components Granular Activated Carbon
and lifetime Hollow Fiber Membrane
AS raw water tank
AS ltered water tank
ABS lter housing
Water ow rate 0.15L/min
Total water ltered 200 L
Model AWP2900
AWP2920
AWP2921
Main components Granular Activated Carbon
and lifetime Hydrogen ion exchange resin
Potassium ion exchange resin
AS raw water tank
AS ltered water tank
ABS lter housing
Water ow rate 0.25L/min
Total water ltered 200 L
Operating pressure 0 - 0.1MPa
Applicable water Municipal tap water
60g
1 pc
2 months
1 pc
1 pc
1 set
AWP2915
AWP2918
AWP2922
45 g
32.5 g 2 months
32.5g
1 pc
1 pc
1 set
1

Overview

A
B
C
D
*Notes:
1. AWP2900, AWP2915, AWP2918 and AWP2950 do not have lter cartridge timer.
2. AWP2900, AWP2915, AWP2918, AWP2921, AWP2922 and AWP2920 are
with granular activated carbon and ion exchange resin cartridge. (AWP201)
3. AWP2950 and AWP2970 are with hollow ber membrane and granular
activated carbon lter cartridge. (AWP261)
4. There may be di erences in the appearance between di erent models.
Timer for lter replacement
In order to maintain the best status of the lter
cartridge, Philips recommends you to replace the
60
lter cartridge at least every 60 days.
This timer has a 60-day countdown. A new pitcher
with timer should be with no display until it is activated.
- Start: Please press "SET" button rmly for 3 seconds to activate the timer.
- Reset: Reset is required for the rst time. Press the "SET" button rmly for
8 seconds. The timer will be reset to 60 Days and start to calculate.
- Normal reset: When it displays 00, after the lter cartridge is replaced, press
the "SET" button rmly for 3 seconds to start a new cycle of countdown.
- Forced reset: For the replacement of lter cartridge at any time within a cycle
of timing, press "SET" button rmly for 8 seconds to force it to reset.
- Pause/Resume: When the countdown is started, press the "SET" button rmly
for 3 seconds and the timer can be switched between Pause and Resume.
- During countdown, the dot will be ashing, and the number of days & graph will
be decreasing. At the beginning it will show 60 days, and please replace the
lter when the timer shows 00.
E
A Timer*
B FIltered water outlet
C AS raw water tank
F
D AS ltered water tank
E Tap water inlet
G
F Cover
G Handle*
H Filter cartridge*
H
2