4 Safety Precautions
► Use and store the battery at temperatures
between - 10°C and +50°C.
► Do not immerse battery in fluids.
► Keep battery away from metallic objects.
► Do not expose battery to high pressure.
► Do not expose battery to microwaves.
► Protect battery from chemicals and salts.
4.6
Safe Condition
4.6.1
Chainsaw
The chainsaw is in a safe condition if the following points are
observed:
– The saw is not damaged.
– The saw is clean.
– The chain catcher is not damaged.
– Chain brake is operating properly.
– The controls function properly and have not been
modified.
– Chain lubrication is operating properly.
– Wear marks on chain sprocket are not deeper than 0.5
mm.
– A combination of guide bar and saw chain recommended
in this instruction manual is mounted.
– The guide bar and chain are properly mounted.
– The chain is properly tensioned.
– Only original STIHL accessories designed for this saw are
fitted.
– Accessories are properly mounted.
0458-791-9821-C
– The oil tank is closed.
WARNING
■ If components do not comply with safety requirements,
they will no longer function properly and safety devices
may be rendered inoperative. This can result in serious or
fatal injuries.
► Work only with an undamaged chainsaw.
► If the saw is dirty: Clean the saw.
► Work only with an undamaged chain catcher.
► Never modify your chainsaw. Exception: Mounting a
combination of guide bar and saw chain recommended
in this instruction manual.
► If the controls do not function properly: Do not use your
saw.
► Only fit original STIHL accessories designed for this
saw model.
► Mount the guide bar and chain as described in this
instruction manual.
► Mount accessories as described in this instruction
manual or the instructions supplied with the accessory.
► Never insert objects in the saw's openings.
► If you have any queries: Contact your STIHL servicing
dealer for assistance.
4.6.2
Guide Bar
The guide bar is in a safe condition if the following points are
observed:
– Guide bar is not damaged.
– Guide bar is not deformed.
– The minimum groove depth is maintained, @ 19.3.
– Bar rails are free from burrs.
– Bar groove is not pinched or splayed.
English
45