Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; Control Panel - Electrolux ECN40105W Benutzerinformation

Gefriertruhe
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

26 electrolux
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer, in
either its refrigerant circuit or insulation
materials. The appliance shall not be dis-
carded together with the urban refuse
and rubbish. The insulation foam con-
tains flammable gases: the appliance

Operation

Switching on
Insert the plug into the wall socket.
Turn the Temperature regulator clockwise.
The Pilot light will light up.
The Alarm light will light up.
Switching off
To turn off the appliance, turn the Tempera-
ture regulator to the OFF position.
Temperature regulation
The temperature is automatically regulated.
To operate the appliance, proceed as fol-
lows:
• turn the Temperature regulator towards
to obtain the minimum coldness.
• turn the Temperature regulator towards
to obtain the maximum coldness.
A medium setting is generally the most
suitable.

Control panel

1
1
High temperature alarm light
2
Pilot light
3
Action Freeze light
4
Action Freeze switch
and Alarm reset
Action Freeze function
You can activate the Action Freeze function
by pressing the Action Freeze switch.
2
3
4
shall be disposed according to the ap-
plicable regulations to obtain from your
local authorities. Avoid damaging the
cooling unit, especially at the rear near
the heat exchanger. The materials used
on this appliance marked by the symbol
are recyclable.
However, the exact setting should be chosen
keeping in mind that the temperature inside
the appliance depends on:
• room temperature
• how often the lid is opened
• the quantity of food stored
• the location of the appliance.
The Action Freeze light will light up.
This function stops automatically after 52
hours.
It is possible to deactivate the function at any
time by pressing Action Freeze switch. The
Action Freeze light will switch off.
High temperature alarm
An increase in the temperature in the freezer
(for example due to an power failure) is indi-
cated by:
• switching on of the Alarm light
• sounding of buzzer.
During the alarm phase, the buzzer can be
switched off by pressing the Alarm reset
switch.
During the alarm phase, don't place food in-
side the freezer.
When normal conditions are restored the
Alarm light will switch off automatically.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis