3.
Pull the film leader out to the red index
mark.
Hold the film cartridge and ensure film is properly positioned
with no slack.
4.
Close the camera back, and check that
the film has been correctly loaded.
When the film has been properly set, " " is displayed on the
frame counter when the camera is turned on.
If the letter " " apears on the LCD panel, the film is not
properly loaded. Open the camera back again and reload film.
Take some trial shots
Before taking important pictures, it is strongly
recommended to take a few trial shots first to familiarize
yourself with the camera and all of its features.
Nikon cannot be held responsible for malfunctions
caused by using the Lite Touch Zoom 70Ws QD in ways
not specified in this manual.
Preparations
E
11