Renkforce CMP-960USB Bedienungsanleitung Seite 35

19 BRAKE button
The BRAKE function makes the track start or stop slowly after the PLAY/PAUSE button (3) was pushed. This
function simulates start-up or stop of a record.
20 10 keyboard
Use this button field to directly select any track. To select a two-digit track number. e.g. 12, push buttons 1 and 2
quickly in sequence.
21 FOLDER button
This button changes the function of the two SEARCH buttons (23 and 24) at the operating unit. Choose between
the SEARCH or FOLDER function. The device will automatically return to the SEARCH function after a few
seconds.
22 JOG MODE button
Determine the JOG wheel function here. Choose between the function PITCH BEND, SEARCH or SCRATCH.
23 SEARCH button
Push and hold the button to speed up the search (forwards). With the FOLDER function active, this button can be
used to select a folder in the MP3 directory.
24 SEARCH button
Push and hold the button to speed up the search (reverse). With the FOLDER function active, this button can be
used to select a folder in the MP3 directory.
25 SKIP button
Push this button to jump to the next track. Keeping the button down for some time will cause continuous jumping
to the next track.
26 SKIP button
Push this button to jump to the start of the track or last track. Keeping the button down for some time will cause
continuous jumping to the last track.
27 USB interface
Insert the USB memory stick here.
28 USB LED
The USB LED lights up when the USB input was selected for playback.
29 CD LED
The CD LED lights up when the CD was selected for playback.
30 SD LED
The SD LED lights up when the SD card reader was selected for playback.
31 SD card reader
Insert the SD card here.
32 SOURCE button
Use this button to select the playback source CD, SD or USB. The playback source can only be changed in pause
mode.
(forwards)
(reverse)
(forwards)
(reverse)
35