Maintenance - Toro Flex-Force 81802 Bedienungsanleitung

5. To remove the battery pack, slide the battery backward out of the
charger.
6. Refer to the following table to interpret the LED indicator light on
the battery charger.
Indicator
light
Off
Green
blinking
Green
Red
Red blinking
*Refer to Troubleshooting (page 11)

Maintenance

Maintenance and servicing are not required under normal conditions.
When you clean the surface of the equipment, wipe it only with a dry cloth.
Do not disassemble the equipment; if it is damaged, contact your
Authorized Service Dealer.
Storage
Important:
Store the tool, battery pack, and charger only in
temperatures that are within the appropriate range; refer to
Specifications (page
Important:
If you are storing the tool for a year or longer, remove the
battery pack from the tool and charge the battery pack until 2 or 3
LED indicators turn green on the battery. Do not store a fully charged
or fully depleted battery. When you are ready to use the tool again,
charge the battery pack until the left indicator light turns green on
the charger or all 4 LED indicators turn green on the battery.
•
Disconnect the product from the power supply (i.e., remove the battery
pack) and check for damage after use.
•
Clean all foreign material from the product.
•
When not in use, store the tool, battery pack, and battery charger out
of the reach of children.
Indicates
No battery pack inserted
Battery pack is charging
Battery pack is charged
Battery pack and/or battery charger is over or under the appropriate
temperature range
Battery pack charging fault*
7).
for more information.
9