DAB auto scan
The auto scan will search for the entire DAB Band III channels. After the scan has finished, the first
alphanumerically found station will be automatically selected.
1.
To activate auto scan, first press the MENU button to enter into the Tune Select Menu and
then press the ▲ or ▼ button to select "Autoscan", finally press the SELECT button to
confirm, the display will show "Scanning ..." and a progressing slide bar. (F. 3)
2.
All the stations that have been found will be stored automatically, to explore the stations that
have been found, press the ▲ or ▼ buttons and when you find a station that you would like
to listen to, press the SELECT button.
DAB manual tune
1.
To select manual tune, first press the MENU button to enter into the Tune Select Menu, then
press the SELECT button to select "Manual tune". (F. 4) (F. 5)
2.
Press the ▲ or ▼ button to move through the DAB channels, the display will show "5A to
13F" and their associated frequencies.
3.
When your desired frequency appears in the display, press the SELECT button to confirm.
The name of the station group (ensemble/multiplex) will be displayed.
4.
To listen to the station selected, press the SELECT button again.
DAB secondary services
On some occasions you will see a ">" symbol directly after the name of the station, this indicates
that there are secondary services available to that station. These secondary services contain extra
services that relate to the primary station. E.g. a sports station may want to add extra commentaries.
The secondary services are inserted directly after the primary station. To select the secondary
station, press on the SELECT control once.
DAB display modes
Every time you press the INFO button, the display will cycle through the following display modes:
Time and date
The time and date will be automatically updated by the broadcasted information; it is no need to set
the clock manually. In the unlikely event that no clock information is received, the display will show
"<TIME/DATE>".
DA18
FM DAB+
7