Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation and Use of the Appliance
Position of the Appliance
• Attention should be paid to the distance be-
tween the hob and hood before installation.
This distance should be 65 cm.
• For gas hobs, from the grill surface,
• The measure must be taken from the glass
surface on electric hobs.
Your new appliance is especially
energy efficient. You will find
C
here some advises on how to
save more energy while using
the appliance, and required to
destroy the appliance in a proper
way.
Things to do for energy
saving;
• Ensure sufficient air intake to make the hood
operate efficiently and with low operation
noise during cooking.
• Set the fan level according to the density of
steam in kitchen. Use the high level only when
needed. A lower fan level means less energy
consumption.
• If dense smoke is expected in the kitchen,
select a higher level of fan in advance. It is
required to operate the hood much longer
to remove the smoke already spread all over
kitchen.
• Turn off the hood when not in use.
• Clean or replace the filter at intervals stated,
thus, the efficiency of the ventilation is in-
creased and the risk of fire is eliminated.
Installation of the Appliance
• Checking the Wall
NOTE:
A
Use protective gloves and glass-
es while performing drilling and
cutting operations.
The wall must be flat, vertical and have suffi-
cient strength to bear the product.
• Depth of the drill holes must be in conformity
with the bolt length.
• Bolts and pins are suitable for use on brick
walls. For other types of construction (e.g.
plasterboard, porous concrete etc.), please
use suitable fixing pins and bolts.
Picture 7
NOTE:
A
Before drilling the wall, make
sure that there are no electricity,
gas or water pipes around the
points you are planning to drill.
DE
EN
FR
PL
RO
BG
EL
27
Werbung
Inhaltsverzeichnis
