Playing Back Music Via Bluetooth - AEG SR 4372 Bedienungsanleitung

English
44
• Displaying radio text. If there is no radio text available,
this line of the display remains empty.
• Display of the radio frequency.
Scan DAB stations
Digital Audio Broadcasting (DAB) is a digital broad casing
standard for terrestrial reception of digital radio. A list of radio
stations which can be received in Germany is available on the
Internet at www.digitalradio.de.
NOTE:
In Germany approx. 70% of the country' s area is covered by
digital radio broadcasts (as of Nov. 2011). In the individual
areas however, coverage and provision vary greatly. If the
DAB stations in your region cannot be received or only with
interferences depending on location, in this case you can
switch to the FM band to receive this station. This is only
possible however if these stations are broadcast via VHF.
Find out more on the internet site of the radio station.
1. Press the MODE button (4) repeatedly until "Switch to
DAB" appears on the display.
2. Press the MENU button (9). The display shows the "Full
scan" menu option.
3. Press the / / ENTER button (5). The device then
searches for the radio stations which can be received.
4. You can select the next or the previous station by using
the / buttons (3/11). Confirm your selection with the
/ / ENTER button (5).
5. If the reception is too weak and the received station
"motorboats", try to improve the reception by changing
the position of the antenna.
NOTE:
• For optimum DAB reception, we recommend to align
the telescopic antenna vertically.
• To manually set a DAB frequency, proceed as de-
scribed in the "Settings menu" section.
Display additional DAB information
In DAB mode, you can display the following additional infor-
mation if broadcast by the radio station. To do so, press the
INFO button (2).
The program type (PTY) of the station will be displayed by
default (e.g. pop music, news, etc.).
• Displays the name of the station group (e.g. DR
Deutschland).
• Display the date.
• Frequency of the current radio station.
• The "SIGNAL ERROR" display shows the signal quality.
The lower the adjacent figure, the better the quality.
• Displays the digital Audio Bit Rate.
• DLS: Short for Dynamic Label Segment. This involves
complementary data. This content may be e.g. informa-
tion about the station or the music title and artist being
played.
• Displays the received signal strength.
Save station
1. If you have found the desired station, hold down the
PRESET button (10). The first preset location appears on
the display. If the preset location is still empty the word
EMPTY appears under PRESET STORE.
2. For choosing the memory position, please press
buttons (3/11).
3. Press / / ENTER to save the settings.
Select a preset station
1. Press the PRESET button (10).
2. Press the / buttons (3/11) to choose a memory
position.
3. Confirm your selection with the
(5).

Playing back music via Bluetooth

Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interference
can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-ena-
bled device. The functional radius is limited to approx.
15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
To be able to remotely control the source, the playback de-
vice must support the AVRCP profile (Audio Video Remote
Control Profile).
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in your
player (e.g. mobile phone). For this, refer to the operation
manual of your player.
2. Use the MODE button (4) to select BLUETOOTH mode.
"Pairing" starts flashing in the display. Shortly after that
you will hear the speaker announcing "PAIRING". This
signalizes that the device is in pairing mode.
/
/ / ENTER button