Residual Risks; Technical Data; Before Starting The Equipment - Hurricane HVL-S-1532 Originalbetriebsanleitung

• Keep the power cable well away from the cutting
tools. Should the power cable become damaged
during work, then instantly disconnect the power
cable from the mains.
Do not touch the power cable before it has been
disconnected from the mains.
• Keep the extension cables away from the teeth.
The teeth may damage the cables and result in
contact with live parts.
• Check that the mains voltage is the same as indi-
cated on the rating plate.
• Wherever possible connect the implement to a
power socket with a residual- current circuit break-
er that has a rated current of not more than 30 mA.
• Avoid body contact with earthed parts (e.g. metal
fences, metal posts).
• Only use approved extension cables of the type
H05VV-F or H05RN-F with a maximum length of
75 m and which have been approved for open-air
use. The stranded cord diameter of the extension
cable must be at least 2.5 mm2. Always unreel a
cable drum to its full length so that the entire cable
can be checked for damage.
• Use the envisaged cable suspension when attach-
ing an extension cable.
• Never pull the cable to disconnect the plug from the
socket. Protect the cable from heat, oil and sharp
edges.
• If the connecting cable is damaged, first disconnect
the extension cable from the socket. You can then
disconnect the connecting cable of the equipment.
• If the power cable for this equipment is damaged, it
must be replaced by the manufacturer, a customer
service agent of the same or a similarly qualified
person in order to prevent hazards.

Residual risks

Even if you use this electric power tool in ac-
cordance with instructions, certain residual
risks cannot be rules out. The following hazards
may arise in connection with the equipment's
construction and layout:
1. Damage to hearing if no suitable ear protection
is used.
2. Health damage caused by hand-arm vibrations if
the equipment is used over a prolonged period or
is not properly guided and maintained.
Warning! This electric tool generates an electromag-
netic field during operation. This field can impair ac-
tive or passive medical implants under certain condi-
tions. In order to prevent the risk of serious or deadly
injuries, we recommend that persons with medical
implants consult with their physician and the manu-
facturer of the medical implant prior to operating the
electric tool.
20 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

5. Technical data

Main Voltage
Power Input
Working width
Number of blades
Number of claws
Scarifing depth
Protection class
Protection type
Weight
Information about noise level measured in accord-
ance with applicable standards:
Sound pressure LpA = 84,5 dB(A)
Sound power LWA = 97,3 dB(A)
Uncertainty KPA / KWA = 3 dB(A)
Wear hearing protection.
The effects of noise can cause a loss of hearing.
Scarifying roller vibration Ahv = 4.27 m/s2
Aerator roller vibration Ahv = 3.8 m/s2
Measurement uncertainty KPA = 1.5 m/s2
Use of the electrical scarifier over a long period can
lead to vibration-related circulatory disorders (Ray-
naud syndrome).
Information about the duration of use cannot be pro-
vided in this case, since this can vary from person to
person.
Keep the noise emissions and vibrations to a
minimum.
• Only use appliances which are in perfect working
order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.

6. Before starting the equipment

Before you connect the equipment to the mains
supply make sure that the data on the rating plate are
identical to the mains data.
Warning!
Always pull the power plug before making
adjustments to the equipment.
230-240V~ 50Hz
1500W
320 mm
16
20
-12 / +4 mm
II
IPX4
9,3 kg