Connecting The Power Cables - Yamaha MCR-E410 Bedienungsanleitung

Once all connections are complete, connect the power cable of the CD player to the AC OUTLET(S) terminal on the rear
of the receiver (or the AC wall outlet if the AC OUTLET(S) terminal is not available), and then plug the power cable of
the receiver into the AC wall outlet.
AC OUTLET(S) (SWITCHED)
U.K. model............................................................. 1 outlet
Other models......................................................... 2 outlets
Use these outlet(s) to supply power to the CD player or any connected components. Connect the power cable of your
other components to these outlet(s). Power to these outlet(s) is supplied when the receiver is turned on. For information
on the maximum power or the total power consumption of the components that can be connected to these outlet(s), see
"Specifications" on page 44.

Connecting the Power Cables

ANTENNA SPEAKERS
75
UNBAL.
DOCK 6 MIN / SPEAKER
CD FM
R L
GND
IN
TAPE/MD
OUT
AM
SUBWOOFER
OUT
AUX
R L
LINE OUT DIGITAL OUT TO RX-E410
OPTICAL COAXIAL
L
R
CONNECTING THE POWER CABLES
MAINS
AC OUTLETS
SWITCHED
TO CDX-E410
100W MAX. TOTAL
Receiver
(Europe model)
MAINS
CD player
To the AC wall outlet
To AC OUTLET(S) on the
rear panel of the receiver
(or the AC wall outlet )
17
En