Recording Search; Channel; Second; T Rec Type(Search By Event) - urmet domus 1093 Schnellanleitung

8.3

RECORDING SEARCH

Press "PLAY" on the front panel of the device in LIVE mode.
A password must be entered by default. The following window will appear.
The selected item is highlighted.
Press arrows "◄►" to point the cursor to the various menu items.
Press "ESC". to quit the menu.
8.3.1

CHANNEL

Use this option to select the (main) channel to be played.
Use "▲▼" to select.
8.3.2

SECOND

This device supports up to two playback channels.
This option is used to select the second channel to be played in addition to the main channel.
Use "▲▼" to select.
These two channels will be played at the same time. One only control interface is available.
One only main channels will be played if the second channel is not played (option "NO").
8.3.3

T REC TYPE(SEARCH BY EVENT)

This option can be used to select the recording type to be sought.
Possible options are: "All time", "Motion", "Allarms", "Command" and "All".
Use "▲▼" to select.
8.3.4

TIME (SEARCH BY DATE AND TIME)

This option is used to define recording search by date and time.
Use "◄►" to point the cursor to the day/month/year of the period to be set.
Press "▲▼" to select day/month/year and hours/minutes.
Specific messages will appear if times overlap.
8.3.5

CARD NO

For future developments.
8.3.6

SEARCH

Select "SEARCH" to start searching according to the set parameters.
The hit list will appear in the box underneath. Seven recordings will be shown on each page. To scroll the pages, position the
"Active Frame" on "Page n°." and press "▲▼" or directly enter the page number.
Use "▲▼" to select the recording.
A specific message will appear if the device finds no recordings which satisfy the set search criteria.
DS1093-019
Figure 34: playback menu
45