How To Start The Sewing Machine; Foot Control; Cloth Waste Box - Texi Integra 5 Benutzerhandbuch

EN

HOW TO START THE SEWING MACHINE

FOOT CONTROL

Push foot control plug into
connector socket, and connect the
power line plug into power supply
outlet.

CLOTH WASTE BOX

During the sewing with edge knife you can
use lint tray (cloth waste box).
Insert the hasp on the cloth waste box into
the groove on the looper cover.
90
Texi Integra 5 INSTRUKCJA 2019-ALL.indb 90
POWER/LIGHT
SWITCH Your machine will not operate
unless the power/light switch is turned on.
The same switch controls both machine
power and sewing light. When leaving
the machine unattended, or servicing the
machine, remove the power line plug from
supply outlet.
Push the cloth waste box below,
until the above insert the hasp into
the groove on the looper cover.
Texi Integra 5
17.09.2019 11:58