Pty Seek Function; Eon Function - Yamaha HTR-5830 Bedienungsanleitung

PTY SEEK function

If you select the desired program type, the unit
automatically searches all preset Radio Data System
stations that are broadcasting a program of the required
type.
1
Press PTY SEEK MODE to set the unit in
PTY SEEK mode.
The program type of the station the unit is currently
receiving , or "NEWS" flashes on the front panel
display.
To exit from the PTY SEEK mode, press PTY SEEK
MODE again.
PTY SEEK
MODE START
2
Press PRESET/TUNING l / h to select the
desired program type.
The selected program type appears on the front panel
display.
l PRESET/TUNING h
SET MENU
3
Press PTY SEEK START to begin searching
all preset Radio Data System stations.
The selected program type flashes and the "PTY
HOLD" indicator lights up on the front panel display
while the unit is searching for stations.
To cancel searching, press PTY SEEK START again.
PTY SEEK
MODE START
• The unit will stop searching if a station that is
broadcasting a program of the required type is
found.
• If the station found is not the desired one, press
PTY SEEK START again. The unit begins
searching for another station that is broadcasting a
program of the same type.

EON function

This function uses the EON data service on the Radio
Data System station network. If you select the desired
program type (NEWS, INFO, AFFAIRS or SPORT), the
unit automatically searches for all preset Radio Data
System stations that are scheduled to broadcast a program
of the required type and switches from the station being
currently received to the new station when the broadcast
starts.
Note
• This function can only be used when an Radio Data System
1
Flashes
2
PTY HOLD
Lights up
I To cancel this function
Press EON repeatedly until the program type name
disappears from the front panel display.
RECEIVING RADIO DATA SYSTEM STATIONS
station that offers the EON data service is being received.
When the unit is tuned to such a station, the "EON" indicator
lights up on the front panel display.
Check that the "EON" indicator lights up on
the front panel display.
If the "EON" indicator does not light up, tune in to
another Radio Data System station so that the
"EON" indicator lights up.
Press EON repeatedly to select the desired
program type (NEWS, INFO, AFFAIRS or
SPORT).
The selected program type name appears on the front
panel display.
EON
• If a preset Radio Data System station of the
selected program type starts broadcasting, the unit
will automatically switch from the program being
currently received to that program. (EON indicator
flashes.)
• When broadcasting of the required program ends,
the unit returns to the previous station (or another
program on the same station).
37