Silvercrest SBLH 10 A1 Bedienungsanleitung Seite 99

while on the other the LED flashes
white. These two paired loudspeakers
can now be connected to an audio de-
vice. The loudspeaker with the flashing
LED plays the left audio channel, and
the loudspeaker with the lit LED plays
the right audio channel.
4. Switch on the audio device (e.g.
smartphone) and start the Bluetooth
connection. The audio device will now
receive the device identification
"SBLH 10 A1".
5. Establish a connection to the loudspeak-
ers on the audio device. If you are
asked for a password, enter "0000".
or
Hold the part of the audio device with
the NFC logo in direct contact with the
NFC logo 2 on the loudspeaker with
the flashing LED 8 (see "Establishing
connection via NFC" on page 95).
All three devices are now interconnect-
ed. The list of Bluetooth connections on
the audio device displays the identifica-
tion "SBLH 10 A1". The LEDs 8 on both
loudspeakers now light up in white and
an audio signal is heard.
97
GB