Indication
TEL
Telephone muting
SCROLL *
5
Scroll
WOOFER
Subwoofer cutoff
frequency
HPF
High pass filter
EXT IN *
6
External input
TAG DISP
Tag display
REAR SPK *
7
Rear speaker output
AMP GAIN
Amplifier gain control
IF BAND
Intermediate frequency
band
*
5
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*
6
Not required for the Bluetooth adapter and JVC DAB tuner. Displayed only when one of the following sources is
selected—FM, AM, DAB, DISC, USB, Bluetooth, or LINE IN.
*
7
Displayed only when Dual Zone is activated (see page 30).
Item
Setting, [reference page]
(
: Initial)
• MUTING 1/
: Select either one which mutes the sounds while using a cellular
MUTING 2
phone.
• OFF
: Cancels.
• ONCE
: Scrolls the track information once.
• AUTO
: Repeats scrolling (at 5-second intervals).
• OFF
: Cancels. (Holding D DISP can scroll the display regardless of the
setting.)
• LOW
: Frequencies lower than 85 Hz are sent to the subwoofer.
• MID
: Frequencies lower than 125 Hz are sent to the subwoofer.
• HIGH
: Frequencies lower than 165 Hz are sent to the subwoofer.
• HPF ON
: The cut-off frequency is chosen automatically according to the
WOOFER setting (LOW/MID/HIGH) so that you can enjoy the bass
sound purely from the subwoofer if it is connected.
• HPF OFF
: Cancels.
• CHANGER
: To use a JVC CD changer, [36], or an Apple iPod/a JVC D. player, [38].
• EXT IN
: To use any other external component, [39].
• TAG ON
: Shows the tag while playing MP3/WMA/AAC/WAV tracks.
• TAG OFF
: Cancels.
• ON
: Select this to turn on the rear speaker output.
• OFF
: Cancels.
• LOW PWR
: VOL 00 – VOL 30 (Select if the maximum power of each speaker is less
than 50 W to prevent damaging the speaker.)
• HIGH PWR
: VOL 00 – VOL 50
• AUTO
: Increases the tuner selectivity to reduce interference noises between
adjacent stations. (Stereo effect may be lost.)
• WIDE
: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
SETTINGS
45