Temperature / Fan Speed / Filter Reset - Fakir prestige AC 90 Bedienungsanleitung

- and + (5)
Fan speed (6)
Filter reset (7)
Operation
Temp.indicator:
Each time the + or - button is pressed, the setting tem-
perature will increase or decrease by 1 °C (1 °F).
The setting temperature ranges from 16 °C (60 °F) -
32 °C (90 °F).
By pressing + and - button at the same time for 3
seconds, the display will toggle between Celsius and
Fahrenheit.- In cooling mode, when + or - button is
pressed, the setting temperature is displayed and be
adjusted.
- In auto and cooling mode, temp.indicator display is
setting temperature.
- In dry and fan mode, temp.indicator display is room
temperature.
By pressing this button you can select the fan speed
as follows:
Auto - high - med - low
After the running time of the unit has reached 250
hours, the filter reset indicator lights up and the air
filter should be cleaned. After cleaning, press the
button, the filter reset indicator light will turn off and
the running time will be cleared. If you don't press the
button when the indicator light illuminates, the indica-
tor light will always illuminate except the unit power is
off.
Note!
If the power of the unit is interrupted, it will restart itself
in its last used mode / setting once the power is resto-
red. The compressor will start after approx. 4 minutes.
43