Assembly; Assembling The Curved Handle; Assembling The Grass Bag; Operation - FLORABEST FRM1800 A1 Originalbetriebsanleitung

GB
cable is damaged, it must be replaced
by the manufacturer, the customer serv-
ices of the same, or a qualified person,
in order to avoid hazards.
• Do not connect a damaged power
cable to the mains. Do not touch a
damaged power cable when it is
connected to the mains. A damaged
power cable may result in contact with
live parts.

Assembly

Disconnect the plug before any
work on the equipment. There is a
risk of injury.
Assembling the
Curved Handle
1. Remove the two pre-installed but-
B
terfly nuts (2a) and their screws
from the lawnmower housing
(7). Insert the lower bar (3) into
the slot on the lawnmower hous-
ing (7).
2. Fix the bottom bar (3) using the
two screws and butterfly nuts
(2a).
C
3. Fix the curved handle (1) using
the enclosed screws (16) and the
wing nuts (2b) on the lower bar
(3). There are two possible posi-
tions.
4. Clip the cable hooks (
the bar (3) and the handle (1) to
fasten the cable.
When both wing nuts are loosened,
the curved handle can be folded
down for storing the equipment.
Ensure that the power cable is not
caught.
10

Assembling the Grass Bag

D
. The.textile.fabric.(18).of.the.
. Do.not.work.with.the.lawn-
The level gauge (21) is located on the side
of the grass catcher (4).
Flap (21) open:
grass catcher (4) empty
Flap (21) closed:
grass catcher (4) full
10) into
A

Operation

Hanging On / Removing the
Grass Bag
E
Clip the fabric (18) into the up-
per tray of the grass collection
bag (4).
Hang the fabric (18) of the grass
collection bag (4) into the pipe
clip (19).
grass.bag.(4).must.be.passed.
over.the.inside.of.the.two.
side.stabilising.bars..The.sta-
bilising.bars.are.therefore.
visible.from.the.outside..See.
image.section.
Connect the handle (20) in one
of the two pieces of the collec-
tion box (4).
mower.without.the.collision.
guard.or.lawn.box..There.is.
a.risk.of.injury.
1. To hang on the grass bag (4),
lift the collision guard (9) and
hang on the grass bag. Fold the
collision guard (9) onto the grass
bag (4). It holds the grass bag in
the correct position.