Using the CD-ROM
Manual
The supplied CD-ROM includes manuals for this printer
(in Japanese, English, French, German, Italian, Spanish,
Dutch, Swedish, Portuguese, Finnish, Danish,
Norweigan and Greek). The copies of these manuals are
created in pdf (Portable Document Format).
Preparations
One of the following programs must be installed on your
computer in order to use the operation manuals
contained on the CD-ROM disc.
• Adobe Reader Version 6.0 or higher
Memo
If Adobe Reader is not installed, you can download it
from the following URL:
http://www.adobe.com/
Adobe and Adobe Reader are trademarks of Adobe Systems
Incorporated in the United States and/or other countries.
Reading the CD-ROM Manual
To read the manual on the CD-ROM, proceed as follows.
1
Insert the CD-ROM disc in your CD -ROM drive.
The manuals are saved in the Instructions For Use
folder.
2
Select and click the manual that you want to read.
Memo
The files may not be displayed properly, depending on
the version of Adobe Reader. In such a case, install the
latest version you can download from the URL
mentioned in "Preparations" above.
Note
If you lose the CD-ROM disc or you cannot read it for
some reason, you can purchase a new CD-ROM disc.
Contact your nearest Sony service representative.
8
Using the CD-ROM Manual / Specifications
Specifications
Power requirements
100 to 240 V AC, 50/60 Hz
Input current
3.5 to 1.5 A
Operating temperature
10 °C to 30 °C (50 °F to 86 °F)
Operating humidity
20 % to 80 % (no condensation
allowed)
Operating pressure
700 hPa to 1,060 hPa
Storage and transport temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage and transport humidity
20 % to 80 % (no condensation
allowed)
Storage and transport pressure
700 hPa to 1,060 hPa
Dimensions
About 412 × 210 × 431 mm (w/h/d)
(16 3/8 × 8 3/8 × 17 inches)
(without including projecting parts)
Mass
Approx. 16 kg (35 lb 4 oz)
Printing system Thermal printing
Thermal head
2,560 elements, 11.8 dot/mm (300dpi)
Gradations
512 levels
Maximum print size
232.2 × 196.4 mm
Picture elements
2,743 × 2,320 dots
Printing time
Approx. 40 seconds
Digital interface
Network connector × 1
(RJ-45 Modular jack), Conforming
to 100BASE-TX standard
USB connector × 1
Hi-Speed USB (USB 2.0
compatible)
Input connector AC IN (for power)
Accessories supplied
Paper tray (1)
Tray guide cover (1)
Thermal head cleaning kit (1)
Cleaning sheets (2)
USB Cable 1-824-211-41 (Sony) (1)
Floppy disk (1)
CD-ROM (1)
Before Using this Printer (1)
Warranty card (1) (for the customers in
the U.S.A and Canada)
Accessories supplied separately
UPT-736BL Blue Thermal Film
Printing Pack
UPP-725 Thermal Paper Printing Pack