Device Components; Bus Coupler - Aventics SERCOS III Betriebsanleitung

7
6
Fig. 2: Bus coupler overview
1 LED displays for diagnostic messages
2 Bus slave label
3 X71 (BUS IN) connection for the bus coupler to control the valves
4 X72 connection (Ethernet) for the bus coupler
5 X10 connection (POWER) to supply power to the valve solenoids
6 Screw cap A 0.6 + 0.2 Nm: DIP switch S1 (diagnosis settings)
7 Screw cap B 0.6 + 0.2 Nm: sliding switch S2 (valve assignment for power supply)
8 FE connection 4 + 0.5 Nm
9 Pocket for slide-in labels (see "Spare parts and accessories" on page 84)
1)
For plug assignment, see pages 63 and 66.
AVENTICS | SERCOS III | R412012610–BDL–001–AB
5.2

Device components

5.2.1

Bus coupler

9
8
9
1)
Device Description
1
2
3
4
5
1)
59