Overview Of The Main Menu; General Settings - Clatronic AR 829 DVD Bedienungsanleitung

Overview of the main menu

• General Settings (1)
• Language settings (2)
• Video settings (3)
• Speaker settings (4)
• Digital settings (5)
NOTE:
Some of the menu settings can only be selected in stop mode
(depending on the DVD).

General Settings

TV-System
Match the output of the DVD-Player to the colour transfer system
of your replay device. The following options are available:
• PAL: A system commonly used in Europe.
• AUTO: Select this setting if your replay device is a multisys-
tem unit.
• NTSC: A system primarily used in North America.
NOTE:
By pressing the BND/SYS (Fig. 1/23) you can also switch
between the options.
Auto Play
If the function is activated the DVD Menu is skipped and the
playback of the main movie begins automatically.
TV Type
30
Here you can adapt the output of the DVD-Player to the TV-
aspect.
Concerning the background: If you do not have a wide screen
TV the TV-aspect will be 4:3. However, most feature films have
an aspect of 16:9, the image is therefore too wide for the TV-
screen.
Here you can specify how the replay of the film is to be adapted
to the replay device:
• 4:3/PS: You will only see the middle section of the film. The
borders will be cut off ("Pan-Scan").
• 4:3/LB: You will see the complete width of the film. The film
is thus reduced in size, whereby black bars appear below
and above the film ("Letter-Box").
• 16:9: Select this option if you use a wide screen TV for
replay. Please note that films, that have been recorded with
TV-aspect 4:3 can still be replayed using aspect 4:3. This
means, that replaying this film will not require the complete
wide screen area of the television.
NOTE:
The setting "4:3/PS" is not supported by all DVDs.
Password
If you want to operate the DVD-Player with a child protection sys-
tem, you must first enter a password. This password safeguards
the settings for the child protection system, so that it can only be
changed by yourself.
In order to change the password, you must first enter the current
password. The master password is "0000".
NOTE:
If you forgot your password, you can deactivate the child
protection system with this password.
Proceed as follows to change the password:
1. Enter the present password in the "Password", line with the
numeral keys (illustration 1/11) of the remote control. To
prevent the password from being read by unauthorized per-
sons only the characters "XXXX" will appear on the screen.
2. Now enter your new password into the row. Confirm your
entry with the ENTER button (illustration 1/22).