Operation; Power On/Off; Video Recording - Wiseup SCT1000 Benutzerhandbuch

III. Operation
>> Before using, please make sure your clock camera is fully charged.
>> Remove the insulating films both from the end of the backup battery and the remote controller.
>> Remember to point the remote controller towards the LCD of the clock every time you
press a button.
>> Please make sure the Micro SD card has been formatted already and is securely fitted
into the camera's SD card slot, or it will not work. We recommend you use a SDHC Class
10 Micro SD card.
[Note]:
If no Micro SD card is fitted into the camera, the blue indicator light will come on for 1
second, then flash quickly for 10 seconds and turn off. The camera will shut down automatically.

3.1. POWER ON/OFF

3.1.1. Slide the Power Switch to the ON position and then press the Power Button once
to power on the camera. The blue indicator light will come on and stay illuminated,
indicating the camera has entered into standby mode automatically.
3.1.2. Power off the camera by pressing the Power Button twice in a row. Slide the Power
Switch to the OFF position.
[Note]:
1). The camera will shut down automatically if it is in standby mode without any operation more
than 3 minutes.
2). When the camera is working and its battery is low, the blue indicator light will flash quickly for
40 seconds and turn off. The camera will shut down automatically.

3.2. VIDEO RECORDING

3.2.1. Slide the Power Switch to the ON position and then press the Power Button once to
power on the camera. The blue indicator light will come on and stay illuminated, indicating the
camera has entered into standby mode automatically.
3.2.2. Press the Video Recording Button once to start video recording. The blue indicator
light will flash 3 times and turn off.
3.2.3. Press the Video Recording Button once to stop video recording. The blue indicator
light will come on and stay illuminated, indicating the camera is back to standby mode.
[Note]: