Christopeit Sport WP1000 Montage- Und Bedienungsanleitung Seite 15

Training area in mm
(for home trainer and user)
Cleaning, Checks and Storage of the home bike:
1. Cleaning
Use only a less wet cloth for cleaning.
Caution: Never use benzene, thinner or other aggressive cleaning
agents for surface cleaning as this damage caused.
The device is only for private home use and for use suitable indoors.
Keep the unit clean and moisture from the device.
2. Storage
Remove the batteries from the computer while intending the unit
for more than 4 weeks not to use. Fold up the seat frame until it is
locked. Choose a dry storage in-house and spray some oil to the
thread of the handlebar bolt for fold up function. Cover the bike to
protect it from being discolor by any sunlight and dirty through dust.
3. Checks
We recommend every 50 hours to review the screw connections for
tightness, which were prepared in the assembly. Every 100 operating
hours, you should spray some oil at the thread of the handlebar
bolts for fold up function.
Free area in mm
(Training area and security area
(rotating 60cm))
Troubleshooting
If you cannot solve the problem with the following information,
please contact the authorized service center.
Problem Possible Cause
Computer No Batteries insert
has no value or batteries empty
at Display if
you press any
key.
Computer is Sensor impulse
not counting missing base on
data and do not well plugged
not switch connection
on after start
cycling.
Computer is Sensor impulse
not counting missing base on
data and do not correct position
not switch of sensor.
on after start
cycling.
15
Solution
Check the position of batte-
ries at battery compartment or
replace batteries.
Check the plug connections at
computer.
Check the distance between
magnet and sensor. The magnet
which is positioned at frame
should have only less than
< 5mm distance against the
sensor position.