Beurer BARBERS CORNER HR 8000 Gebrauchsanweisung Seite 32

To activate the travel lock, press and hold the ON/OFF switch
for 3 seconds.
The travel lock indicator lights up.
If the ON/OFF switch
locked, the travel lock symbol will light up in the display to indi-
cate that the device is locked.
To deactivate the travel lock, press and hold the ON/OFF switch
for 3 seconds.
Direct drive function
If the battery is completely flat, you can continue using the de-
vice immediately via mains operation.
Tips for shaving/trimming
• Clean your face before shaving to remove any dirt or grease
from the skin. This will reduce skin irritation and make the shave
feel more pleasant.
• Apply light pressure and shave in circular motions to keep skin
irritation to a minimum.
• Shave the most awkward areas first, such as under the nose
and along the jawline. This is because the shaver heads are
still cool at the start of the shave, and if you need to shave
over these awkward areas multiple times, the shaver heads
may have warmed up towards the end of your shave and this
can feel unpleasant.
• Try to stretch the skin being shaved using your fingers.
• The shorter the beard hair is, the more effectively the rotary
shaver will shave.
• If you switch from wet to dry shaving (or vice versa), it may take
up to 3 weeks for your skin to get used to the new method.
is briefly pressed when the device is
32