Black&Decker KS900S Originalanleitung Seite 10

ENGLISH
How to use the Auto Select™ dial (fi g. G)
This tool is fi tted with a unique Auto Select™ Dial (8) to set the speed and the pendulum blade action
for various cutting applications. To select the optimum speed and pendulum blade action for the type of
material being cut, turn the dial (8) as shown in the table below:
Switching on and off
♦ To switch the tool on, press the on/off switch
(2).
♦ To switch the tool off, release the on/off switch
(2).
♦ For continuous operation, press the lock-on
button (1) and release the on/off switch (2).
♦ To switch the tool off when in continuous
operation, press the on/off switch (2) and
release it.
Sawing
Hold the tool fi rmly with both hands while cutting.
The shoe plate (7) should be held fi rmly against
the material being cut. This will help prevent the
saw from jumping, reduce vibration and minimise
blade breakage.
♦ Let the blade run freely for a few seconds
before starting the cut.
10
Icon Application
Kitchen work
surfaces, work
tops, laminate
board
Scrolling/curves/
craftwork,
hardwoods,
decking, fl ooring
Plywood and
wood panels
General timber,
soft wood, fast
rip cutting
Plastics,
Perspex, PVC
Sheet metal tin
plate, ceramic
tile, fi breglass
sheet
Slow speed,
precision start
♦ Apply only a gentle pressure to the tool while
performing the cut.
Operating the laser (fi g. H - K) ('L' units only)
Installing the batteries (fi g. H)
Detach the laser module (14) from the jigsaw by
removing the screw (13) and pulling the laser
module forward. Insert two new 1.5 Volt AAA
alkaline batteries, making sure to match the (+)
and (-) terminals correctly. Re-attach the laser
module (14).
Adjusting the laser side-to-side (fi g. I)
Note: The laser is intended as a cutting aid and
does not guarantee a precise cut.
Warning! Do not adjust the laser with the jigsaw
plugged in.
♦ Use the laser adjustment screw (15) to align
the laser line with the saw blade if needed.
Speed/ Blade Type
Pendulum
Fast speed, No General wood
pendulum
Fast speed, No Scrolling wood
pendulum General wood
Fast speed, General wood
medium
pendulum
Fast speed, max General wood
pendulum
Medium speed, General purpose
medium
pendulum
Low speed, No Metal or ceramic
pendulum or fi breglass
blade
Slow speed, No Choose the
pendulum correct blade for
the application