Replacing The Filters - Ghibli & Wirbel Power Indust 60 TP M Gebrauch Und Wartung

5.4

Replacing the filters

To replace the filters, proceed as follows:
Turn off the vacuum cleaner by turning the main switch to the "OFF" position
Disconnect the vacuum cleaner plug from the power socket.
Warning!
Wear individual protection devices.
Block the vacuum cleaner by means of the stop. Lift the lever located in the bottom part of the cleaner
to release and remove the container.
Release the stops that hold the head.
Lift the head by means of the handles provided and rest this on a support bench.
When resting the head on the support, be careful not to damage the power cable.
Warning!
To lift the head, two people are required.
ENGLISH- 22 -
Maintenance Section