Control Panel - Zanussi zdi101 Benutzerinformation

• Do not change the specifications or modify this prod-
uct. Risk of injury and damage to the appliance.
• Do not use the appliance:
– if the mains cable or water hoses are damaged,
– if the control panel, worktop or plinth area are dam-
aged, that you can get access to the inner side of
the appliance.

Control panel

1 Programme knob
2 Start/cancel button
3 Half-load button
4 Indicator lights
5 On/off indicator light
Half-load button
The half-load option is not available for all washing pro-
grammes. Refer to the chapter 'Washing programmes'.
• Load dishes in the upper and lower basket.
• Decrease the detergent dosage when you use the half-
load option.
• Press the half-load button to set the option.
18
Contact your local Service Force Centre.
• Do not drill into the sides of the appliance to prevent
damage to hydraulic and electrical components.
Warning! Carefully obey the instructions for
electrical and water connections.
Indicator lights
The indicator light comes on when the washing phase or
the rinsing phase operates.
The indicator light comes on when the drying phase op-
erates.
The indicator light comes on when the washing pro-
gramme is completed. Auxiliary functions:
• Level of the water softener.
• An alarm if the appliance has a malfunction.
– The half-load indicator light comes on, when the
half-load option is selectable.
With the half-load button pressed the time duration
and the consumption of water and energy are re-
duced.
5 4
2 3
1