Getting Started; Select The Display Language And Cancel The Demonstration; Set The Clock And Date; Set The Other Optional Settings - Kenwood DPX-7200DAB Bedienungsanleitung

Getting Started

1

Select the display language and cancel the demonstration

When you turn on the power for the first time (or [FACTORY RESET] is set to
[YES], see page 6), the display shows: "SEL LANGUAGE" "PRESS"
"VOLUME KNOB"
1
Turn the volume knob to select [EN] (English) / [RU] (Russian) /
[SP] (Spanish) / [FR] (French) / [GE] (German), then press the knob.
[EN] is selected for the initial setup.
Then, the display shows: "CANCEL DEMO" "PRESS" "VOLUME KNOB".
2
Press the volume knob again.
[YES] is selected for the initial setup.
3 Press the volume knob again.
"DEMO OFF" appears.
Then, the display shows the selected crossover type: "2-WAY X ' OVER" or
"3-WAY X ' OVER"
• To change the crossover type, see "Change the crossover type" on
page 7.
2

Set the clock and date

1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [CLOCK], then press the knob.
To adjust the clock
3
Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Set the time in the order of "Hour" "Minute".
5
Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6
Turn the volume knob to select [12H] or [24H], then press the knob.
To set the date
7
Turn the volume knob to select [DATE FORMAT], then press the knob.
8
Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press
the knob.
9
Turn the volume knob to select [DATE SET], then press the knob.
10
Turn the volume knob to make the settings, then press the knob.
Set the date in the order of "Day"
"Year".
11
Press and hold to exit.
To return to the previous setting item, press
3

Set the other optional settings

You can only set the following items while the unit is in STANDBY source.
1 Press B SRC repeatedly to enter STANDBY.
2
Press the volume knob to enter [FUNCTION].
3
Turn the volume knob to select an item (page 6), then press the
knob.
4
Repeat step 3 until the desired item is selected or activated.
5
Press and hold to exit.
To return to the previous setting item, press
"Month" "Year" or "Month" "Day"
.
.
ENGLISH
5