Installation In Kitchen Cabinet With Door - Burg BGF90AK Bedienungs- Und Installationsanleitung

FIXING THE HOB
· Apply the one-sided self-adhesive
sealing tape "C" that came supplied
with your hob all the way around the
lower edge of the cooking surface and
along the outer edge of the glass
ceramic panel. Do not stretch the
adhesive (Figure 3.4).
· Place the hob into the cut out in the
work top and position it correctly
(Figure 3.2).
· Secure the hob in place using the
brackets (A) and screws (B) provided
(Figure 3.5, 3.6)
FASTENING THE BRACKETS
· This hob comes with an installation
kit that includes brackets and screws
for fastening the hob to the fixture
panels.
· Turn the hob upside down and tighten
the brackets "A" which can be
connected to a hob in two different
positions depending on the thickness
of the fixture panel, as shown in figure
3.5 or 3.6, to the appropriate screw
holes.
INSTALLATION IN
KITCHEN CABINET WITH
DOOR
(Fig.3.7)
The distance between the bottom of the
hob and the fixture surface should be at
least 60mm.
C
Tt>25 mm
Tt
Fig.3. 5
Tt 25 mm <
Tt
Fig.3 .6
10
Fig.3 .4
B
A
B
A
Fig.3 .7