Led Indicators - Axis Q1615 Mk II Installationsanleitung

10 Iris connector
11 Power connector
12 Power LED indicator
13 Network LED indicator
14 RS485/RS422 connector

LED Indicators

Note
• The Status LED can be configured to be unlit during normal operation. To configure,
go to Settings > System > Plain config.
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to Settings >
System > Plain config.
Status LED
Green
Amber
Note
The Network LED can be disabled so that it does not flash when there is network traffic. To
configure, go to Settings > System > Plain config.
Network LED
Green
Amber
Unlit
Note
The Power LED can be configured to be unlit during normal operation. To configure, go to
Settings > System > Plain config.
Power LED
Green
Amber
AXIS Q1615 Mk II Network Camera
Indication
Steady green for normal operation.
Steady during startup. Flashes when restoring settings.
Indication
Steady for connection to a 100 Mbit/s network. Flashes for
network activity.
Steady for connection to a 10 Mbit/s network. Flashes for
network activity.
No network connection.
Indication
Normal operation.
Flashes green/amber during firmware upgrade.
11
EN