Sony DSBK-120 Bedienungsanleitung Seite 19

7
[DSR-85/85P]
Insert the cables connected to
the SDI-27 board into the slit
in the top of the board slot
frame near the rear panel of the
VCR.
[DSR-80/80P]
Insert the two pairs of cables
connected to the SDI-28 and
SDI-27 boards into the two
central slits in the top of the
board slot frame near the rear
panel of the VCR as described
below, then go to step 9.
Insert the pair of cables with
red and black connectors into
the slit near the DV-15 board
and the pair of cables with
green and blue connectors into
the other slit.
8
[DSR-85/85P]
Use a procedure similar to
steps 2 to 7 to remove the
DEN-5 board, attach the SDI-
28 board, and return the DEN-
5 board to the slot.
Seen from the front of the
VCR, the DEN-5 board is in
the sixth slot from the left.
Check that it matches the "N
DEN" indication engraved in
the top of the slot frame.
Insert the cables connected to
the SDI-28 board into the slit
in the top of the board slot
frame near the rear panel of the
VCR.
DV-15 board
Insert the pair of cables with green and blue
connectors into this slit.
Insert the pair of cables with red and black
connectors into this slit.
DEN-5 board
"N DEN" indication
(Continued)
19