Time Adjustment - PiC indolor MY CHECK Gebrauchsanleitung

Clearing values from memory
1. By pressing the "M" key for approximately 5 seconds, the data in the memory will be eliminated.

Time adjustment

1. To adjust the date/ time in the monitor, press the
display will show a blinking number showing the day.
2. Set the day by pressing the
The key again to confirm the entry, and the screen will show a blinking number representing
the month.
3. Change the date, hour and minutes as described in 2 above, using the
key to confirm the choice.
4. A "0" will reappear as the Blood Pressure Monitor is ready to take a new measurement.
Press the key
for 5 seconds
key. Each time the key is pressed the number goes up by one. Press
repeat process to set date and time
25
key to access the time adjustment menu. The
key to change and the
Press the mode change key
Blinking month
Change the month
Confirm the entry