Components, Configuration And Performances - Voice Systems Proteus LIVE Bedienungsanleitung

Bi-Amp Bi-Processed Active Speaker

Components, Configuration and Performances

The diffusion section uses high efficiency custom devices, engineered in the
special configuration:
2 x 8" woofers + 1" compression driver.
The connection of these elements offers significant advantages for both the reliability and
the acoustic performance, especially in the reproduction of the vocal range.
Some examples:
a. The double 8" woofer reduces the interacting
masses by 30% compared to the classic
configuration with a single 12" speaker. This
leads to a higher acceleration factor (faster
response to the transients), a wider extension
toward high frequencies and therefore a
better acoustic continuity among high/low
components of the system.
b. Using a 1" HF driver, made following the last
generation technologies and provided with a
1.7" polyamide diaphragm (instead of a
conventional component provided with a
titanium diaphragm), causes a much more
efficient high frequencies (108.5 dB)
transduction, a wider frequency extension, a
better acceleration factor and a higher
reliability.
c. The HF driver is assembled on a elliptical wave trumpet, designed for being free
from acoustic resonance and, at the same time, for being characterised by a wide
dispersion angle, an excellent quality of the diffusion – even out of the axis – and
a special intelligibility of medium-high and high frequencies range.
All these characteristic provide an acoustic coherence that allows:
- The audience:
- The performers: to maintain a constant hearing perception, whenever the
to enjoy the same sound quality anywhere on the stand.
loudspeaker is placed vertically, for monitor use, etc.
7