Preview - Interacoustics EyeSeeCam vHIT Gebrauchsanweisung

EyeSeeCam vHIT Instructions for Use – EN
5. Information on the vertical plane impulses
This plot helps you verify that your vertical impulses were performed in the correct directions,
indicating that you have stimulated the canal you had intended to measure the performance for.

4.6.3 Preview

Open an "old" (previously tested) patient file and you will see the previously collected test data. A check
skows tests that were completed and a report icon shows if a report was generated earlier. If you click on
a test (in this case Calibrate Head) the report preview will pop up, then, if you hit Generate Report a full
report will pop up
Figure 4-30 Report Preview (for previously collected data) from completed test menu
Page 34