Cleaning And Maintenance - Eldom HR30 Bedienungsanleitung

1
GENERAL DESRIPTION
1. Handle
2. Safety tip-over switch
3. Oscillate lever
4. Switch- lower minor heater
5. Switch- upper minor heater
6. Device's switch- middle minor heater
7. Foot
TECHNICAL DATA
- power: 1200 W
- voltage: 230V~ 50Hz
USING THE HEATER
- after unwrapping the device make sure it has not been damaged during transport. In case of
any doubts you should refrain from using it until you contact the authorised service provider.
- fix the foot (7) with added screws
- place the device on flat, stable, firm and heatproof surface
- plug the device to the electric mains with parameters compliant to the instruction
- switch on the device (6)
- additional power is set by pressing switches (4) and (5)
Heater has automatic oscillating function (right-left, 70°) which can be started by pressing
a switch.
During the initial use you may notice a specific odour from heating elements and isolation.
This is normal.
In the feet of the device there is a safety tip-over switch cuts the power supply in case the
device falls over.
Do not cover outlets while the device is working.

CLEANING AND MAINTENANCE

- before cleaning the device unplug it
- the device should not be immersed in water
- do not use abrasive or harsh cleaners and cleaning products
- shell should be wiped with moistened cloth
INSTRUCTION MANUAL
R
2
4
HEATER HR30
3 4 6
5
7