Cuda surgical LLS-2000 Gebrauchsanleitung Seite 11

Turn light source off and unplug power cord. On back of unit remove fuse by turning fuse
cover and pulling out fuse. Replace fuse with 2 AMP (1/4" x 1 ¼") time delay 250V rated
fuse. Insert back into fuse housing.
Re-connect the power cord and turn the LED light source on according to section 6.1.
9.2 LIMITED WARRANTY
Your LED light source carries a 3-years warranty from the date of shipment on
workmanship and all defects of material. Should your product prove to have such defects
within 3 years of the shipment. ST TECHNOLOGIES
component part without charge. Should your LED Light Source product(s) need servicing
under this warranty, please contact, ST TECHNOLOGIES
documentation. You should carefully pack unit in a sturdy carton and ship it to the factory.
Please include a note describing the defects, your name, telephone number and a return
address. Warranty does not cover equipment subject to misuse, accidental damage,
normal wear and tear or if transferred to a new owner without authorization from,
ST TECHNOLOGIES
other rights that vary from state to state.
POST WARRANTY REPAIRS: You may return your product(s) for repair, shipping prepaid to
the factory. Your product will be inspected and an estimate of repair charges will be submitted
to you for approval. Payment must be received before repairs are completed.
In the US:
•
Customer Service
•
LIT168NR CUDA
(English)
. This warranty gives you specific legal rights and you may also have
®
®
SURGICAL
will repair or replace the product or
®
®
877-814-2237 (toll free)
904-208-2291
Date of Revision:08/08/14
return authorization
Rev. C
Page 11 of 65