auna Milano Bedienungsanleitung Seite 22

EN
22
Establish BT connection
1. When the speaker is in BT mode, it automatically switches to pairing
mode. The blue LED flashes slowly.
2. Open the BT settings on your smartphone/pad and search for the
loudspeaker in the BT device list. As soon as your smartphone/pad is
connected to the loudspeaker, „BT is connected" sounds and the blue
LED lights up permanently. If the connection is disconnected, the blue
LED flashes slowly.
3. If this speaker is connected to the smartphone and you are playing
music via BT, the speaker will stop when you briefly press the Play/
Pause/ button. To resume playback, press the Play/Pause button again.
4. When this speaker is connected to the smartphone, press and hold the
Play/Pause button to disconnect the BT connection. You can now make
a BT connection to another device.
Note: The best distance between Smartphone/Pad and speaker is ≤ 10m.
Answering calls via BT
• When a call comes in, the phone number of the incoming call sounds
with the sound „dudu" or the sound „Cell phone rings" from the speaker,
if it is connected to an Android smartphone. If the speaker is connected
to an iPhone, the phone number of the incoming call sounds and „Cell
phone rings" from the speaker.
• Briefly press the Play/Pause button to answer the call and talk through
the microphone. Briefly press the Play/Pause button again to end the
call.
• Press and hold the Play/Pause button to reject the call.
• Press the Play/Pause button twice to call back the last connected phone
number.
Adjusting the Volume
• Press the (+) button to increase the volume.
• Press the (-) button to decrease the volume.