Charging your P790
See figure 2 on page 1.
You can use a Motorola travel charger, in-car charger or mini USB/USB
cable to charge your P790.
The indicator light turns flashing green when the battery is charging. When
the P790's battery is fully charged (about 2-3 hours), the indicator light turns
solid green.
Note: When using the mini-USB cable, charging capability and time is based
on the power output capability of the computer's USB port (or USB hub port).
Some ports may charge very slowly (or not at all).
Charging one device
See figures 3 on page 2.
1 Push forward on back edge of the power switch. Do not press down on
Release Button. When turned on, the device charging port is extended
out from the P790.
2 Insert Device Charging Plug into mini-USB charging port on your device.
When inserted, the P790 begins charging your device.
3 When charging is complete, remove carefully the device from the device
charging port.
4 Turn off P790 by pressing Release Button and sliding power switch
backwards. The device charging port is retracted into the P790.
P790 use with micro-USB devices
Your P790 mobile charger is shipping with 2 adapters to allow compatibility
between devices with different types of connector.
micro/mini-USB adapter (SKN6257): charge your P790 with a micro-USB
charger
mini/micro-USB adapter (SKN6252): charge a micro-USB phone or
accessory with the P790 mobile charger
Note: You do not need these adapters when your P790 is charged with
a mini-USB charger and when it is used to charge a mini-USB phone or
headset.
English
5