Faber IN-NOVA SMART series Bedienungsanleitung Seite 17

• Insert the Hood Canopy into the overhead unit.
• Align the hood canopy with the front bottom edge of the unit (excluding any doors).
• Remove the grease filters.
• Screw the Hood Canopy to the overhead unit from the inside, using the screws 12a.
• Fit the spacers (20) and adjust them to the correct position using the screws 12b before
tightening completely.
12a
WARNING: the Hood Canopy must be fitted into the Unit before it is fixed to the wall.
EN
Fixing the Hood
20
12b
12b
20
12b
20
12a
1
17
7