General Information - techem 2 Bedienungsanleitung

16

General information

Product description / intended use
The Techem radio frequency smoke detector 2 is used to recognise fires
early and for local acoustic alerting in the private area and in the housing
industry. – It is not suitable for applications above and beyond this.
The radio frequency smoke detector 2 operates using a tested, per-
manently integrated long-term lithium battery. – It can be muted by
pressing the user key.
The high-quality smoke detector (in the following referred to as SD)
meets the latest technical requirements. It warns you of smouldering
fires and fires with smoke development in good time, thus providing
a considerable gain in safety. – This warning function is very important
as the sense of smell is inactive when you sleep. In order to ensure that
this function is maintained, always ensure that any smoke arising in the
event of fire can reach the smoke detectors unhindered. – Therefore you
must not change the installation locations under any circumstances
whatsoever!
!
The SD may not be suitable for persons who have a restricted
sense of perception. – In this case, please refer to your landlord
or property administration.
Target group
These operating instructions are intended for flat occupants in whose
flat the Techem radio frequency smoke detector 2 is installed.
Techem radio frequency smoke detector 2 – operating instructions