Keep Warm Function; Compliance Statement - Lauben LBNEK17BG Benutzerhandbuch

Keep Warm Function

a. After turning on, the LED and control light will flash and you'll hear a beep.
b. Press the button to select a specific temperature (50°C, 70°C, 80°C and 90°C). When making a selection, you'll hear a beep.
When the control light is flashing at the set value, press the on/off button and hold it for 2-3 seconds. The control light and
LED with turn on. The kettle is now in keep warm mode, where it keeps the water at the pre-set temperature. When the
water reaches the set temperature, you'll hear two beeps. After 30 minutes, the control light and LED will turn off.
8. Pick up the kettle by the handle and pour the water from the spout into the prepared container. Avoid direct contact with the hot
water to avoid scalding.
1. The symbol on the product and in the documentation indicates
that used electronics shall not be disposed of into communal
waste. When disposing of appliances, take them to the designated
waste collection yard, where they will be accepted for free. Proper
disposal will help to preserve precious natural resources and protect
the environment as well as public health, which both may get
threatened by improper disposal and its consequences. For further
detail contact the local authorities or the nearest waste collection
yard. Improper disposal of electrical appliances may result in fining
in compliance with state regulations. Disposal information for
DE
users of electrical and electronic appliances (industrial use):
Disposal information for users of electrical and electronic appliances
are to be asked for at and provided by the seller or supplier.
EN
Disposal information for users of electrical and electronic
appliances in countries outside of the European Union: The
disposal symbol stated above
CZ
Disposal information for users of electrical and electronic appliances
are to be asked for at and provided by the seller or supplier. All
information is represented by the crossed container on the product,
SK
package and printed documentation.
2. Repairs within the warranty period are to be claimed at the seller.
In case of technical difficulties or questions, please contact the seller,
who will inform you about the further procedure. Observe the rules
for work with electrical appliances. The user is not authorized to
dismantle the product nor to replace any part of it. Open or removed
covers present a risk of electrical shock. Incorrectly assembled
appliance also presents the risk of electrical shock when re-plugged.
The warranty period is 24 months unless stated otherwise. The
warranty does not cover damage caused by non-standard usage,
mechanical damage, exposure to extreme conditions, usage
contrary to the manual, as well as ordinary wear and tear.
8 |
is valid only in the European Union.
The manufacturer, importer or distributor will not be held
responsible for any damage caused by improper usage of the
product.

Compliance Statement

Elem6 s.r.o. hereby declares that all Lauben appliances comply with
the fundamental requirements as well as other relevant provisions
of Directive 2014/30/EU and Directive 2014/35/EU. The products
are designated for unrestricted sale in Germany, the Czech Republic,
Slovakia, Poland, Hungary and other EU member states. The
Compliance Statement can be found on www.lauben.com
Import to EU
elem6 s.r.o., Braškovská 308/15, 16100 Praha 6
www.lauben.com
Printing errors and changes in the manual are reserved.