Cleaning The Roller Brush - Philips FC6161 Bedienungsanleitung

1
2
1
2
2 Press the floor nozzle release button (1) to detach the stick from
the floor nozzle (2).
3 Remove the large dirt particles from the joint.
4 Place the stick back onto the floor nozzle ('click').

Cleaning the roller brush

When the 'brush blocked' light starts to flash red, the roller brush is
blocked. If this happens, follow the steps below to clean the roller brush.
1 Switch off the appliance.
Tip: If the handheld vacuum cleaner is attached to the stick unit, press the
handheld vacuum cleaner release button (1) and remove the handheld
vacuum cleaner from the stick unit (2).
2 Turn the floor nozzle upside down.
3 Rotate the roller brush until the cutting groove faces you.
4 Use a pair of scissors to cut the hairs, threads etc. that have collected
around the roller brush.
5 Remove fluff, hairs and other dirt from the roller brush.
Note: You can also remove the roller brush for easier cleaning.
removing the roller brush
1 Switch off the appliance.
2 Turn the floor nozzle upside down and open the retainer.
English
15