bto X-BOOK 15X984 Ausführliches Benutzerhandbuch Seite 27

Display Devices
Note that you can use external displays connected to the
HDMI-Out port and/or Mini DisplayPort. See your dis-
play device manual to see which formats are supported.
Configuring the Displays in Windows
All external and internal displays (up to 4 active displays)
can be configured from Windows by using the Display or
System (in Settings) control panel or the Project menu.
To configure the displays using the Project menu:
1. Attach your external display(s) to the
appropriate port, and turn it(them) on.
2. Press the + P (or Fn + F7) key
combination.
3. Click on any one of the options from the
menu to select PC screen only,
Duplicate, Extend or Second screen
only.
4. You can also click Connect to a
wireless display at the bottom of the
Project screen and follow the steps to
connect to any wireless enabled display.
To configure the displays using the Display control panel:
1. Attach your external display(s) to the appropriate port, and turn
it(them) on.
2. Right-click the desktop and select Display settings from the
menu.
3. Click the Detect button.
4. The computer will then detect any attached displays.
5. You can configure up to 4 displays from the Multiple displays
menu.
Figure 15
Note that when 4 displays are connected, only 2 displays
Project
may be configured in Duplicate mode.
4 Connected Displays
Figure 16
Display
(Multiple
displays)
23