Herunterladen Inhalt Inhalt Diese Seite drucken

Section 2 Installation; General; Receipt Of Equipment; Recommended Storage Practices - Brooks Instrument MT3809G Installations- Und Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Installation and Operation Manual
X-VA-MT3809G-MT3810G-eng
Part Number: 541B182AAG
September, 2013

2-1 General

2-2 Receipt of Equipment

2-3 Recommended Storage Practices

This section contains the procedures for the receipt and installation of the
instrument. Do not attempt to start the system until the instrument has
been permanently installed. It is extremely important that the start-up
procedures be followed in the exact sequence presented.
When the equipment is received, the outside packing case should be
checked for damage incurred during shipment. If the packing case is
damaged, the local carrier should be notified at once regarding his liability.
A report should be submitted to your nearest Product Service Department.
Brooks Instrument
407 W. Vine Street
P.O. Box 903
Hatfield, PA 19440 USA
Toll Free (888) 554-FLOW (3569)
Tel (215) 362-3700
Fax (215) 362-3745
E-mail: BrooksAm@BrooksInstrument.com
www.BrooksInstrument.com
Brooks Instrument
Neonstraat 3
6718 WX Ede, Netherlands
P.O. Box 428
710 BK Ede, Netherlands
Tel 31-318-549-300
Fax 31-318-549-309
E-mail: BrooksEu@BrooksInstrument.com
Remove the envelope containing the packing list. Carefully remove the
instrument from the packing case. Make sure spare parts are not
discarded with the packing materials. Inspect for damaged or missing
parts.
If intermediate or long-term storage is required for equipment, as supplied
by Brooks Instrument, it is recommended that the equipment be stored in
accordance with the following:
a. Within the original shipping container.
b. Stored in a sheltered area, preferably a warm, dry, heated warehouse.
c. Ambient temperature of 21°C (70°F) nominal, 43°C (110°F) maximum,
7°C (45°F) minimum.
d. Relative humidity 45% nominal, 60% maximum, 25% minimum.
Upon removal from storage, a visual inspection should be conducted to
verify the condition of equipment is "as received".

Section 2 Installation

Models MT3809G & MT3810G
Brooks Instrument
1-4-4 Kitasuna Koto-Ku
Tokyo, 136-0073 Japan
Tel 011-81-3-5633-7100
Fax 011-81-3-5633-7101
E-mail:BrooksAs@BrooksInstrument.com
2-1

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Mt3810gAr-mite mt3750Ar-mite mt3750c

Inhaltsverzeichnis