Parameter Adjustment; On/Off Menu - EcoSmart e-system LiFePO4 Benutzerhandbuch

3.7. Parameter adjustment

Take the following steps to change a parameter:
1. Search for the screen containing the parameter that needs adjusting (figure 3.4).
2. With the cursor in position 1 press on
to the parameter in position 2.
3. Adjust the parameter in position 2 using buttons
4. Press to accept and move the cursor to position 3.
5. Adjust the parameter in position 3 with buttons
6. Press to accept and return to position 1.
7. With the cursor in position 1 again, press buttons
next screen, or
Position 1

3.8. ON/OFF Menu

4:5 Ue me /8
O/Off
te d h
Spl ctl
/8 O/Off
Uit dde:
Stte:
to return to the list of user menus.
HW et
Eble:
SetT:
Illustration 3.4. Adjusting comfort parameters.
On/Off

Shows the unit address. Used to switch the energy manager on / off or
to activate the EMERGENCY status.
37
User manual ecoSMART e-system
to enter the screen and move the cursor
.
.
to go to the previous or

Position 2
Position 3