Additional Safety Instructions For Pneumatic Machines - Parkside 6.3 A2 Bedienungs- Und Sicherheitshinweise

Safety instructions for pneumatic tools
viced, and replaced in com-
pliance with the recommen-
dations in these instructions if
there is to be no unnecessary
increase to noise levels.
HAZARDS FROM VIBRA-
TIONS
Vibrations can prove detrimen-
„
tal to the nerves and blood
circulation in hands and arms.
When working in cold environ-
„
ments, wear warm clothing,
and keep your hands warm
and dry.
If you start feeling numbness,
„
tingling, or pain in your fin-
gers or hands, or the skin of
your fingers or hands starts
turning white, stop work with
the pneumatic angle grinder,
notify your employer, and seek
medical advice.
The pneumatic angle grinder
„
must be operated and serviced
as recommended in these
instructions if there is to be no
unnecessary increase to vibra-
tion levels.
Do not let the machine tool
„
chatter on the workpiece: this
will in all probability increase
the vibrations to a great ex-
tent.
The consumables / machine
„
tools must be selected, ser-
14 GB/CY
viced, and replaced in com-
pliance with the recommen-
dations in these instructions if
there is to be no unnecessary
increase to vibration levels.
Whenever possible, use a
„
column, clamp, or balancing
device to hold the machine's
mass.
Keep a reliable, but not too
„
tight grip on the machine, not-
ing the force of your manual
response: vibration levels tend
to increase with tighter grips.
Use suitable intermediate
„
wheels with bonded abrasives.
ADDITIONAL SAFETY
INSTRUCTIONS FOR
PNEUMATIC MACHINES
Compressed air can cause
„
grievous injury.
When the machine is not in
„
use and before replacing
accessories or performing
repairs, make sure that the air
supply has been shut off, the
air hose is unpressurised, and
the machine has been
disconnected from the air
supply.
Never direct the air flow
„
towards yourself or any other
person.
Thrashing hoses can cause
„
grievous injury. So always