Wine Cellar Features And Use; Initial Setup; Temperature Adjustments - Haier WS50GA Bedienungsanleitung

English

Wine Cellar Features And Use

Initial Setup

Once you have plugged the unit into an electrical outlet, let the unit
run for at least 30 minutes to acclimatize itself before making any
adjustments.

Temperature Adjustments:

WS50GA
• The temperature of wine cellar is preset to 12 °C (54 °F) from the
factory.
• The wine cellar can be set to any temperature between 5
°C (41 °F) and 20 °C (68 °F) in either the compartments to
accommodate your wine storage requirements. To set the
temperature hold the "
will notice the temperature display blink. Press the "
"—" button to increase or decrease the temperature setting.
Once the desired temperature is attained, press the "
stop operation about 5 seconds, panel will memorize the setting. The
temperature display will revert back to display the inside temperature.
It may take some time to reach the set temperature.
• Press the "
(the temperature display model) each other.
WS49GDB
• The wine cellar is preset from the factory to automatically to
accommodate temperature requirements for red or white wines.
• The wine cellar can be set to any temperature between 6 °C and
18 °C in either of the compartments to accommodate your wine
storage requirements. To set the temperature hold the "
for about 3 seconds. You will notice the temperature display blink
for the upper compartment. Press the up or down arrow button to
increase or decrease the temperature setting. Once the desired
temperature is attained, press the "
electronic control panel will memorize the setting. The temperature
display will revert back to display the inside temperature. It may
take some time to reach the set temperature.
4
See
" button for about 3 seconds. You
" button about 3 seconds to transform "°C" and "°F"
See
" button or
" button
" button. Doing this, the
" or