Introduction; Intended Purpose - Parkside PWS 125 E4 Originalbetriebsanleitung

GB IE
Content
Introduction ............................... 26
Intended purpose ....................... 26
General description .................... 27
Extent of the delivery ......................27
Description of function ....................27
Overview ......................................27
Technical data ............................ 27
Notes on safety.......................... 28
Symbols and icons .........................28
General Safety Directions for Power
Tools ............................................29
Safety instructions for all applications 31
Additional safety instructions ...........33
RESIDUAL RISKS ............................33
Additional safety instructions
for all applications ..................... 34
Kickback and corresponding
precautions ...................................34
Special safety instructions for
grinding and cutting .......................34
Other special safety instructions
for cutting grinding .........................35
Additional safety instructions for
working with wire brushes ...............36
Special safety instructions
for working with wire brushes: .. 36
Practical tips .............................. 36
Scrubbing wheels ...........................36
Grinding with a wire brush .............36
Cutting disc ...................................36
Chuck key storage..........................37
Assembly ................................... 37
Mount handgrip .............................37
Assemble/set protective hood/
demounting ..................................37
Installing/changing disc .................38
Installing/changing the wire brush ...38
Operation .................................. 39
Turning on and off ..........................40
Cleaning and servicing ............... 40
Cleaning .......................................40
Servicing ......................................40
26
Storage ...................................... 41
Waste disposal and environmental
protection .................................. 41
Troubleshooting ......................... 42
Replacement parts / Accessories 43
Guarantee ................................. 44
Repair Service ............................ 45
Service-Center ............................ 45
Importer .................................... 45
Translation of the original
EC declaration of conformity .... 152

Introduction

Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected to
a inal inspection. The functionality of your
equipment is therefore guaranteed.
The operating instructions constitute
part of this product. They contain
important information on safety, use and
disposal.
Before using the product, familiarise your-
self with all of the operating and safety
instructions. Use the product only as de-
scribed and for the applications speciied.
Keep this manual safely and in the event
that the product is passed on, hand over
all documents to the third party.

Intended purpose

The angle grinder is a tool for cutting,
scrubbing and brushing metal, concrete or
tiles without using water. This tool is inten-
ded for use with a wire brush.